|
| RECORDER |
|
|
|
장 비 명
|
Waveform Recorder
|
|
모
델 명
|
MT95K2
|
|
제
조 사
|
RECORDER
|
| |
|
|
|
|
|
장비 사양 |
|
|
|
|
사양:
8-32 Channel Strip Chart / Waveform Recorder
No Delay...see full traces on monitor while recording
Personal Chart Setups with on-board floppy drive
Laser Printer Chart Resolution - 300 dpi; crisp traces
Data Capture - up to 32 megabytes in RAM
8 to 32 Waveform Channels - plus 64 events; DC to 20kHz; chart speeds to 500 mm/sec
Chart Specifications:
* Recording Method: Direct writing thermal array
* Real Time Speeds:
1 mm/hr to 200 mm/hr in steps of 1 mm/hr
1 mm/min to 200 mm/min in steps of 1 mm/min
1 mm/sec to 500 mm/sec in steps of 1 mm/sec
* Chart Type and Size: Z-fold pack - 16.3" wide, 393 ft. long, 400 sheets per pack
* Real Time Clock
Real Time Sample Rates
Data Sample Rate: Up to 200 kSamples/sec per channel
Built-in Waveform Monitor
Waveform Channels
Max. Number of Channels: 32
Nominal Bandwidth: 20 kHz
Real Time Recording Formats
* Standard Default: 8 waveforms with 8 channel label buffers in both overlap and separate channel mode
* Disk Based Formats: A variety of 8, 16 and 32 waveform chart formats are supplied on a 3.5" DOS compatible disk which comes standard with all units
* User Designed Formats
* Data Logger: Numeric reporting of waveform data in engineering units
Annotation
* System Log Channel
* Waveform ID
* Waveform Annotation
* Signal Conditioner
Computer Interfaces
* RS-232C Serial Interface
* GPIB (IEEE-488)
Options
Analog Waveform Module - Model AWP1
Number of Channels: 4 per module
Max Number of Modules: 8 per MT95K2
Maximum Input: 250 VDC or RMS
Measurement Range: 50 mV full scale to 250 V full scale
Input Type: Isolated
Operating Mode: DC or RMS
Analog Bandwidth: 20 kHz
Auto-Range: Supports automatic gain and offset adjustment to make a reference signal full scale
|
|
|
|
|
