|
| Audio-precision |
|
|
|
장 비 명
|
AUDIO ANALYZER
|
|
모
델 명
|
System 2722A
|
|
제
조 사
|
Audio-precision
|
| |
|
|
|
|
|
장비 사양 |
|
|
|
|
모델;SYSTEM-2722A/2522A/2322A Series >>>>>>>>>>>>>>>>
사양:
Dolby 인증 테스트 최적의 Audio 측정장비
Audio 아날로그/ 디지털 어느 항목이든 측정가능-Jitter, Eye Pattern, Bit Rate등
96K 와 192K Consumer & Professional Sampling Rate 지원 폭 넓은 Sampling Rate Range - 8K to 200K
지속적인 8KHz에서 100KHz까지 변화 가능
D to A THD : 0.0005% at 22KHz
FFT의 각각의 Data 저장과 측정으로(256K per channel) 최고의 측정
속도 - 강화된 DSP Module 4개 장착
최고 - 170dB까지 FFT Distortion측정 가능
AC, AC+DC, DC 측정가능
Processors run at 100MHz
- Audio Analog/Digital 모든 항목 측정가능
- Digital 192K Sample rates(SYS-2722A 기준)
- PSIA 2722과 연결하여 모든 Digital 신호 분석 가능
- Dolby 인증 Test 최적의 Audio 측정 장비
Option:
Option Adds the IMD Generator and IMD Analyzer
Option Adds the Ton Burst, Square Wave
Option Adds the WOW and Flutter Analyzer
System Two Cascade Plus provides the highest performance and most comprehensive set of features of any audio measurement system. It includes a complete analog and digital generation and analysis capability. It can also operate at higher digital audio sample rates (96kHz and 192kHz).
Turn on High Performance Testing with System Two Cascade Plus
Unparalleled Precision
Low Distortion
Analog System THD+N 20kHz BW -112dB
Typical worst case harmonic < -130dB
Digital Dist. Spurious Products -160dB
High Analog Bandwidth
Signal generation to 200kHz
Measurements to 500kHz
FFTs and Multitone analysis to 120kHz
 ☞☞☞☞ PDF File Down Load(2700 스펙자료다운 받기)
☞☞☞☞ PDF File Down Load(참고자료다운 받기)
☞☞☞☞ PDF File Down Load(SYSTEM2 카다로그 다운 받기)
Low Noise
22–22kHz < -118dBu
A-weighted < -124dBu
Flat Response
20–20kHz typically ±0.003dB
Low Crosstalk
Input < -140dB
Output < -120dB
Low Jitter
Generator < 0.8ns
Analyzer < 1.6ns
FFT Acquisitions
up to 4MSamples (> 1 minute @48kHz) Audio Precision’s System Two Cascade Plus, a PC-controlled audio test and measurement system, is the newest generation of the company’s award-winning System Two. Already the recognized worldwide standard for design and test of audio equipment, Cascade Plus brings the improved distortion and noise specifications required to test the latest advances in converter technology.
True Dual Domain architecture provides uncompromised performance for both analog and digital signals, and the DSP-based analysis techniques offer a wide array of high speed, precise measurements.
Unparalleled Precision
PC-Control and Programmability
Unparalleled Speed
Comprehensive Digital Interface Testing
Flexible Configuration Options
System Two Cascade Plus. Proven, reliable, high performance from the industry’s preeminent audio test and measurement company.
상담문의 담당: 박 만종
연락처:02-6679-1494 , Mobile:010-5247-1494
"""""Total Customer Satisfaction""""""""
|
|
|
|
|
