Ȩ < Àåºñ»ó¼¼º¸±â
 


¢º ÀüüÀåºñ
¢º Campbell scientific
¢º Dranetz-BMI
¢º Audio precision
¢º Fluke
¢º Hioki
¢º Kikusui
¢º California inst.
¢º Yokogawa
¢º Pantos
¢º IWATSU
¢º LINDOS
¢º QUANTUM DATA
¢º Datataker
¢º Hobo
¢º Dynamax
¢º Greenspan
¢º Electro-metrics
¢º Chauvin Arnoux
¢º Kestrel
¢º Surge
¢º GMC
¢º NTI
¢º Astro-med
¢º Fujitsu Denso
¢º Datalogger
¢º Tektronix
¢º NF(NF Corp)
¢º Algodue
¢º Surge protector
¢º AD POWER
¢º Applent Instruments
¢º Makes Instruments

   Hobo

Àå ºñ ¸í

 HOBO ¿Âµµ& ¿ÜÀå ¼¾¼­

¸ð µ¨ ¸í

 H08-002-02

Á¦ Á¶ »ç

 Hobo

   
    Àåºñ »ç¾ç

 

 


»ç¾ç; ¿Á¿ÜÇü ºñ¹æ¼öÇü ·Î°Å







Features and specifications
Capacity: 7943 measurements total
User-selectable sampling interval: 0.5 seconds to 9 hours, recording times up to 1 year
Readout and relaunch with optional HOBO Shuttle
Internal temperature sensor on 4" wire can extend from case
Models with external input accept external sensors for temperature, AC current, 4-20 mA and 0-2.5 Volts DC
Precision components eliminate the need for user calibration
Drop-proof to 5 feet
Mounting kit included (hook/loop, magnet, and tape)
Programmable start time/date
Memory modes: stop when full, wrap-around when full
Nonvolatile EEPROM memory retains data even if battery fails
Blinking LED light confirms operation
User-replaceable battery lasts 1 year
Battery level indication at launch
Operating range: -4¡ÆF to +158¡ÆF
(-20¡ÆC to +70¡ÆC), 0 to 95% relative humidity, non-condensing, non-fogging
Time accuracy: ¡¾1 minute per week at +68¡ÆF (+20¡ÆC)
Size/Weight: 2.4 x 1.9 x 0.8" (68 x 48 x 19 mm)/approx. 1 oz.(29 gms)
Compliance certificate available
NIST-traceable temperature accuracy certification available
Measurement specifications
Temperature (internal sensor)

Range: -4¡ÆF to +158¡ÆF (-20¡ÆC to +70¡ÆC)
Range for internal sensor when used outside of case:
-40¡ÆF to +248¡ÆF (-40¡ÆC to +120¡ÆC)
Accuracy: ¡¾1.27¡ÆF (¡¾0.7¡ÆC) at +70¡ÆF, see plot below
Resolution: 0.7¡ÆF (0.4¡ÆC) at +70¡ÆF
Response time still in air: 15 min. typical with sensor inside case; 1 min. typical with sensor outside case
External input accepts the following sensors:

Wide range of temperature sensors (TMCx-Hx series)
Split-core CTs for AC current (5 Models)
4-20 mA input cable (CABLE-4-20mA)
0-2.5 V DC input cable (CABLE-2.5-STEREO)
External 2.5 volt input specifications

2.5 mm jack: external input ground, input, switched 2.5 V output; external input ground connection is not the same as PC interface connection ground and should not be connected to any external ground
Input range: 0 to +2.5 Volts DC
Accuracy: ¡¾10 mV ¡¾1% of reading
Resolution: 10 mV (8-bit)
Out power: +2.5 Volts DC at 2 mA, active only during measurements

»ó´ã¹®ÀÇ ´ã´ç: ¹Ú ¸¸Á¾
¿¬¶ôó:02-6679-1494 , 011-247-1494

"""""Total Customer Satisfaction""""""""